AMEXMART 60 Inch Tailgate Light Bar Quad Row LED Tail Light Strip with Running Brake Reverse & Sequential Turn Signal

Description

Features：

• 【Multi-function Design】 Amexmart tailgate light bar comes with red running light, red brake light, white reverse light, amber left/right turn signal light. When you turn on the left and right turn lights at the same time will produce a double flash function, this is a normal effect.
• 【Excellent Brightness】Quad-Row 60 Inch truck tailgate light bar adopts 648pcs high quality LED chips, which makes the lumen output is 500% brighter than normal tailgate light strip and ensures your trucks/cars can be seen even in the heaviest traffic of the day or night.
• 【Premium Material】Quad row led tailgate light bars are made of top quality IP68 waterproof rated silicone and durable rust resistant materials to help withstand all weather conditions. These 60” tailgate light strips are super durable with a lifespan of over 50,000 hours.
• 【Easy Installation】Our tailgate led light bar has well conductive standard 4-pin flat plug and Self-Adhesive tape. No drilling required, Plug and Play stick-on installation.
• 【Wide Application】These truck tailgate led light strips operate on 12V DC and are universally compatible for any vehicles with 60 inches tailgate. Our tailgate light strip is also a beautiful and practical auto parts gift for your father/husband/brother/son/friend.
• 【Special Note!!】If you connect a 4-pin tailgate light bar to a 7-pin connector using a 7-pin to 4-pin adapter, our 60 inch tailgate light bar may not work properly. To avoid this, you need to purchase a “7 Pin to 4 Pin Trailer Adapter” or “7 Pin to 4 Pin Trailer Harness with Reverse 12V Wire “.

Specification:

• Type: Tailgate Light Bar/Strip
• Length: 60 Inch
• Light Source: LED
• Voltage：12-24V DC
• Power:  30W
• Number of chips: 648pcs
• Lighting Colors: Red + Amber + White
• Waterproof Rate：IP68
• Working Temperature：-40+85°C
• Lifespan:50,000+ hours
• Package Included: 1Pcs*60” LED Tailgate Light Bar

Mounting Instruction：

• It is recommended that you test the tailgate light bar for full functionality before mounting.
• Unhinge and remove your tailgate.
• Clean the area thoroughly. Any dirt or dust can reduce the strength of the adhesive.
• Prime the area with the Adhesive Booster provided in your kit.
• Peel off the red protective film from the tape side of the bar.
• Apply the truck light bar left to right, pressing firmly 30 seconds.
• Finally, test your truck lights one last time to make sure no wires came loose during installation.

Wiring Instruction：

• Blue wire: Ground (-)
• White wire: Red Running Light
• Yellow wire: Amber Left Turn Signal/Red Brake Light
• Green wire: Amber Right Turn Signal/Red Brake Light
• Red wire : White Reverse Light

Fitment:

• Universal fits for all vehicles with a 60″ tailgate. Not limited to the following models.
• ➤Compatible with Dodge Ram 1500 2500 3500 4500
• ➤Compatible with Ford F150 F250
• ➤Compatible with Chevy, Silverado, GMC, Sierra, Toyota Tundra, and most cars, trucks, Pickup, SUVs, RV, Van, trailers, etc.