Description

Features:
【DOT Approved】DOT SAE E-Mark approved on the top lens, legal on the road. Perfect LED fog light beam pattern and sharp cut-off line will not blind oncoming traffic.
【Super Bright】These dodge ram 3500 fog lights adopt 100% advanced LED chips, emit bright white light, and the luminous flux of each driving fog light is up to 63W@5000LM. 6000K cool white light allows you to see farther and wider in night driving, rain and fog.
【High Performance】New upgraded Amexmart Led fog lights have IP67 waterproof rating, strong shatterproof and anti-collision PC lens, durable enough to withstand any extreme weather conditions. No flicker, good heat dissipation. More than 50,000 hours of service life.
【Fitment】This dodge ram fog light fit for Dodge Models, including 2002-2008 Dodge Ram 1500; 2003-2009 Dodge Ram 2500/ 3500; 2004-2006 Dodge Durango New Body Style models only.
【Warm Tips】If this dodge 2500 fog light does not work, please try to rotate the plug 180 degrees and reinsert it. If you have any questions about this 2008 Dodge Ram Fog Lights, please feel free to let us know and we will be able to help you more.

Specifications:
Type: LED Fog Light
Voltage：12-24V DC
LED Chip：High Intensity LED Chip
Power：126W/SET
Color Temperature: 6000K
Lumen：5000LM
Working Temp：-40+85°C
Waterproof Rate：IP 67
Material: Die-cast Aluminum Housing + PC Lens
Lifespan:50,000+ hours

Fitment:
Compatible with 2002-2008 Dodge Ram 1500
Compatible with 2003-2009 Dodge Ram 2500/3500
Compatible with 2004-2006 Dodge Durango New Body Style models only

Package Includes:
1 Pair LED Fog Lights

Installation Steps:
1. Closely check your existing fog light assembly.
2. Remove the wiring harness from the fog light assembly.
3. Take out the mounting screws of your old fog light assembly. These screws are normally found at the back of the fog light assembly.
4. Take out the fog light assembly from your automobile.
5. Get your new fog light and install it on your vehicle using the mounting screws that you removed earlier.
6. Tighten the mounting screws just enough to keep your new fog light assembly securely installed. Be careful not to tighten the screws too much or they might cause damage to the assembly.
7. Get the wiring harness connected to your new fog light assembly.
8. Switch the fog lights on to see if they are working properly.