Amexmart 5X White LED Cab Lights Smoked Cab Roof Running Top Marker Light for Ford Dodge Ram SUV POV 1500 2500 3500 4500 5500 2003-2018 Pickup Trucks

Description

Note：

• Positioning & drilling is needed when installed on most other vehicles
• You may also need silicone gel or other material to seal the hole
• Please make sure you can handle all the operation before buying, in case of any hassle

Specifications:

• Condition: Aftermarket 100% Brand New
• Position: Inside/Bottom
• Hole Distance: 4″
• Lens Color: Smoke lens
• Lens Material: Polycarbonate
• Voltage: 12 Volts
• Dimension: about 86.0 x 38.5 x 19.5 mm (3.40″ x 1.50″ x 0.80″)
• Waterproof: IP68

Features:

• 【High Quality】Amexmart roof marker lights made of durable ABS material which have been UV treated, so they will not fade from prolonged exposure to sunlight and weather elements. Built-in Intelligent IC driver for best heat dissipation and less power consumption.
• 【Enhance Visibility】Each cab roof light with 12PCS upgrade white LEDs, provide you a better visibility on the road during the night. The individual diode has a round pearl-shaped bulb giving the light a more clearer and superior light distribution.
• 【IP67 Waterproof】Whole-sealed cab clearance light can be used in heavy rain; be ready for different kinds of weather attack, withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weather.
• 【Easy to Install】Plug& Play, come with T10 plug, convenient for modifying & rewiring. Just remove your factory cab lights and bolt these in their place. It will keep stable performance in even the most demanding driving conditions.

Fitment:

• Fits for 2003 2004 2005 2006 2007 2008 2009 2010 Ram 1500 2500 3500 4500 5500, 2011 2012 2013 2014 2015 2016 Ram 1500 2500 3500 4500 5500 Pickup Trucks
• Fits for the Ford F-Series or Chevrolet or GMC trucks and more.

Package Included:

• 5 x Cab Marker LED Lights Assembly
• 5 x Soft Pads
• 10 x Screws (2 for each assembly)
• 1pc Extension Line
• 1 pc Switch Butt

Installation instructions:
1、Expose the wires by removing the entire front map light assembly.
2、Get up to the roof of your truck to measure where you’re going to install these LED cab roof lights. You can use a dry erase marker to mark all the points where you will be drilling into the roof.
3、Screw in 3 holes per LED light: One for each end of the LED and one in the center for the wiring to pass through.
4、Use a screwdriver and attach the screws at the front and the rear of each LED roof lamp to permanently mount it.
5、Wire up the LED lights in parallel. Use some electrical tape to secure the connections. Route the wires through the front map light assembly to complete the wiring portion.
6、Test everything and enjoy your new LED cab roof light.